Scroll down to view and select another product without leaving this page.

Aquatec CDP-6800 Booster Pump (Model CDP-6840-2J03-B221). Three chamber diaphragm pump, self priming, and capable of being run dry. Excellent pump for boosting supply water pressure to your RO system. The pump is a must have when low supply water pressure (<40 psi) exists. The pump delivers 0.38 LPM (1.45 GPD) at 80 psi and 0.73 LPM (278 GPD) in the fully open position. The pump comes standard with 1/4" John Guest inlet/outlet fittings and operates on 24VAC, requiring an optional110v/60 Hz transformer and pressure switch for pump operation. The transformer may be purchased as part of the pump package for a small upcharge.

Aquatec CDP-6840-2J03-B221 Booster Pump

Artikelnummer: CDP-6840-2J03-B221
Pump Package

    MOTOR:TYPE: 24 VAC, Permanent Magnet,Totally Enclosed, Non-Ventilated

    LEADS: 20 AWG, 6” LONG

    TEMP. LIMITS: This Motor is Not Equipped with ThermalProtection. For User Safety, OptimalPerformance, and Maximum Motor Life, TheMotor Surface Temperature Should Not Exceed150°F (66°C), as Shown on the Heat Rise Graph.

    PUMP DESIGN: 3 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry

    TYPICAL APPLICATION: Pre-Filter Water Treatment (R.O. Boost)


    HOUSINGS: Nylon


    DIAPHRAGM: Santoprene

    FASTENERS: Stainless Steel

    LIQUID TEMPERATURE:170°F (77°C) Max.