top of page
Aquatec Autoflush Timers with Flow Restrictor, Dual Wiring Harness
The Aquatec Auto-Flush Flow Restrictor features:
  • Reduction in waste water ratio
  • Increase in the TDS rejection rate
  • Extended membrane life
  • 1/4" John Guest push to connect fittings
  • Hermetically protected electronics for long life
  • Dual wiring harness included
Requires 115VAC to 24 VAC transformer and pressure switch to operate. (Sold separately).

Aquatec Autoflush Timers with Flow Restrictor, Dual Wiring Harness

64,95$Preis

  • Choose the Aquatec Auto Flush Flow Retrictor that meets your RO system flow rate.

    • 300 mL/min (36 GPD)
    • 400 mL/min (36 or 50 GPD)
    • 500 mL/min for (50 or 75 GPD)
    • 600 mL/min (75 GPD)
    • 700 mL/min (75 or 100 GPD)
    • 800 mL/min (100 or 150 GPD)

    An Auto-Flush Flow Restrictor will assist the RO membrane to perform with maximum efficiency for longer time periods. The use of this auto-flush flow restrictor can reduce the “brine to product” ratio, especially in low “TDS” applications, while maintaining or improving system “TDS” rejection rate and extending membrane sediment and carbon filter life.

    Upon system start-up and every hour thereafter, the 24VAC normally closed solenoid valve automatically “power flushes” the membrane at full pump flow, or full line pressure in unboosted systems, for 18 seconds every hour. Turbulent water action scrubs organic and inorganic contaminant’s from the membrane surface, extending membrane life and efficiency.

    The “power flush” system only occurs only while the system is in the water making mode. The flush cycle is reset automatically when the RO system repeats the “water making” mode after the “full tank shut-down” mode. Water which has been standing idle in the membrane module for extended period is purged to the drain.

    The PFR requires its own transformer or can be powered by a booster pump transformer.The valve has a built in, self cleaning, flow restrictor which allows controlled flow to drain when the valve is in the de-activated (closed) state.

    Includes dual wiring harness with Molex connectors to connect to other Aquatec devices.

  • We ship via ShipStation. Shipping options will be available at checkout.

bottom of page