top of page

Aquatec model 5853-2LM2-B534 demand/delivery pump is designed for intermittent or continuous duty, to pressurize water from an atmospheric tank, to deliver water to specified point of use, or to increase pressure when required. 

Aquatec 5853-2LM2-B534 Demand/Delivery Pump

Artikelnummer: 5858-2LM2-B534
105,95$Preis
  • Aquatec DDP-5800 demand delivery pump model 5853-2LM2-B534 is designed for intermittent or continuous duty, either to pressurize water from an atmospheric tank, to deliver water to specified point of use, or to increase pressure when required. Three chamber diaphragm pump, self priming, and capable of being run dry. The pump delivers 1.0 GPM at 40 psi and comes standard with 3/8" John Guest inlet/outlet fittings. This pump operates on 24VAC and requires an optional 110VAC/24VAC 4A transformer for operation. Pump start/shut off can be accomplished via connection to a 110VAC switched outlet or optional 24VAC pressure switch. Pump has 130 psi bypass and built in thermal overload (140F).Three chamber diaphragm pump, self priming, and capable of being run dry. The pump delivers 1.0 GPM at 40 psi and comes standard with 3/8" John Guest inlet/outlet fittings. This pump operates on 24VAC and requires an optional 110VAC/24VAC 4A transformer for operation. Pump start/shut off can be accomplished via connection to a 110VAC switched outlet or optional 24VAC pressure switch. Pump has 130 psi bypass and built in thermal overload (140F).

    • Motor Type - 24 VAC, Permanent Magnet,Totally Enclosed, Non-Ventilated
    • Motor Leads- 14AWG, 12” LongT
    • Protection - This  Motor is Not Equipped with Thermal Protection. For User Safety, Optimal Performance, and Maximum Life, the Motor Surface Temperature Should Not Exceed 150°F (66°C)
    • Pump Design - 3 Chamber Diaphragm Pump, Self-Priming, Capable of Being Run Dry
    • Porting - Push-to-Connect Ports for 3/8” Tubing
    • Switch - None (requires external 24VAC pressure switch)
    • Bypass- Pressure Relief Valve Set To 130 PSI
    • Mounting - Steel Mounting Plate
    • Application - Beverage and Drinking Water
    • Materials - Nylon (housing), EPDM (valves), Santoprene (diaphragms)
    • The  pump should may mounted horizontally, with the pump outlet above the pump inlet, or mounted vertically with the pump above or below the motor.
    • Installation instructions are provided.
bottom of page